WREN Turbojet fuel pump - Model 100-C

Brand: WREN
Product Code: FW100C
Availability: Out Of Stock

WREN Turbojet fuel pump - Model 100-C



As an improved version of our older Model 100-A, the Model 100-C is by far the smallest pump around. This tiny 1.2 ounce pump is ideal for the smaller turbines up to 11 lbs (5 kg / 49 N) thrust such as the Wren Turbine MW44.

Included and factory installed:

  • Stainless steel mounting bracket

  • RF (radio frequency) suppression PCB
As with all our pumps, it features extremely high precision stainless steel gears, our unique floating drive gear design and a hard anodized aluminum body. It has a very low current consumption compared to the bigger pumps.
You should use a high quality fuel filter on the inlet side (suction line, before the pump). We recommend you use the Hanger 9 Fuel Filter available in our "Accessories" section.
The pump does not require any break in and is ready to use. It can be installed in any orientation with the included mounting bracket and hardware.

Weight: 35 g (1.2 oz)
Diameter: 20.0 mm
Length (not including barbed fittings): 38.5 mm
Bypass valve or regulator required: No
RF suppression included: Yes, RF PCB installed
Mounting bracket included: Yes, Stainless steel
High precision stainless steel gears and hard anodized aluminum body
Min. start voltage: 0.95 ± 0.15 Volts
Open flow rate: Approx. 400 ml/min



Click here for complete Model 100-C specs (pdf)

For printing this page, use Landscape page setup


Model 100-C - For up to 11 lbf thrust turbojets


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Related Products (5)